Author Topic: 89 LSC I am building  (Read 3411 times)

0 Members and 1 Guest are viewing this topic.

Lance@DFW

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: I am a geek!!
89 LSC I am building
« on: April 30, 2021, 01:06:17 PM »
Since the departure of Farm Find, we had an empty spot to fill and think we did that just fine. Don't worry, Farm Find went to a loving enthusiast and will live on!

This is Star Fox. Our 1989 Mark VII LSC..

Car was bought from a fellow Lincoln Enthusiast with stuff needing attention. Air ride was all but done with, A/C wasn't working, TEVES system wasn't stopping the car, and, just about every piece of rubber in the front was gone.

All fixed now and getting ready for some "GLB touch-up".

More to come as we throw more stuff at it!

UPDATE: Star Fox is getting a single turbo build!
66mm T04S Head Unit
Custom Modified Fox Manifold Kit (to allow sway bar)
42# Ford Injectors
AEM 340 LPH In-Tank Pump
New Fuel Tank
New Fuel Sending Unit
3" Air/Air Intercooler
40mm Wastegate
Billet Bypass Valve
130A alternator conversion
LMR alternator bracket
Electric fan upgrade
KYB shocks and struts
Sensor lowering
SVO Brake Conversion
Poly bushings where it counts
AEM WBO2
Oil Filter Relocation
Tuning Via Our SFI-SD3 Software Package
We have recently aquired a T5Z trans, and will be documenting that conversion as soon as we land a set of Foxbody pedals. If you know of any, let us know please!
Right now the build is in the rough-in stages before all of the welding and final fitting is done. Scroll down to see the pictures of the process. We are going to push it as far as we can!! Bet the AOD takes a crap first. Then.... Manual swap time.





Smurph

  • Dealer
  • Trade Count: (0)
  • Newbie
  • *****
  • Posts: 3
Re: 89 LSC I am building
« Reply #1 on: April 30, 2021, 01:40:12 PM »
This is going to be a fun car!

Lance@DFW

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: I am a geek!!
Re: 89 LSC I am building
« Reply #2 on: April 30, 2021, 02:23:40 PM »
This is going to be a fun car!

I hope so!