Windows XP is not supported.

You can download build 9209 here if you need to run on Windows XP.

This is the software we use in our Tuning Packages we list on our site. It is not developed by us, but is hands down the best solution for the enthusiast to use, and the only way to use our XDF's.

The software is free to download and use but a promt will pop up for 10 seconds when you start it. This is asking you if you would like to support the developer by sending them $39.00. You should as this software is well worth it. If not, it is fully functional without doing so.

READ THIS UPDATE:

• Version History

5.00.10305.00 (General Release) (01/21/26)

• Changed behavior when clicking on the top-left cell of a table (the "select all" cell) with internally defined axes to match original TunerPro behavior. Now, holding shift while clicking selects all cells, including the row/col header cells. If you do not hold shift, only the body cells will be selected (as was the case with builds 10044 and earlier). This also works with Ctrl + A (select all). Ctrl + A will select only the body. Ctrl + Shift + A selects the body and the axes
• Fixed crash when selecting "New XDF"
• Fixed issue where editor windows weren't closing when pressing "New XDF"
• Fixes and improvements to bin text exporter (added table cell units and other data, fixed possible calculation failures)
• Fixed issue where editing a cell in a table resulted in the wrong graph node being updated if graphing at the same time.

5.00.10277.00 (General Release) (12/04/25)

• Copy/Paste and copy from compare for internally defined axis values in tables now works
• Promoted the setting to keep editors open on save/update to the general tab. it is respected now even when not emulating. You might need to uncheck this setting to restore earlier behavior when editing while not emulating.
• Fixed issue from build 10146 that kept the treeview text custom color set in preferences from working (treeview text color was always black)
• Fixed crashes in 10146 when performing copy/paste/inc/dec operations on selected table axis cells
• Fixed issue in color preferences where item summary list text and backgorund colors were mislabeled.
• Fixed issue where item summary list text color was not being respected
• Added change tracking (red text) for changed x and y axis cells for tables with internally defined axes
• Fixed degraded performance in difference tool when copying a large list of changes between bins.
• Fixed issue from build 10146 where changes in function axes were not being resolved to the function in the difference tool.
• Internal code changes for 64-bit portability

5.00.10146.00 (General Release) 8/28/25)

• Feature: When editing the bin, the corresponding item in the XDF item tree and parameter summary list turns red. Changes are reset when the bin is saved to file.
• Feature: Difference tool: double clicking a difference will not only open the editor, but for tables and functions will now also select the cell that corresponds to the difference
• Feature: For tables with internally defined axes, you can now select and see the selected state of the column or row header cell. This allows you to copy and paste these values between tables (and to external programs like Excel).
• Fix: Function editor: when the function is being graphed, typing in changes in a cell now properly updates the graph
• Fix: For compaitilbity with some K-line OBDII interfaces, when the acquisition serial port is opened, the DTR and RTS lines are toggled off and held there for 20ms, then back on again.
• Fix: percentage comparison mode is now consistent with difference compare mode
• Fix: If a table cell is actively being edited and the 'X' button is pressed to close the editor, the user will be asked if they'd like to apply the change before closing the editor.
• Fix: In the Difference Tool, changes in addresses that fell within an axis that is internally defined within a table were not be resolved to the table.

5.00.10018.00 (General Release) 04/23/24)

• Fixed issue where dragging a point in a 2D/3D graph didn't take into account column, row, or cell conversion equations, which might cause the available range to be incorrect.
• When in percentage compare mode (for tables, functions), if either bin has 0 as a value, "?%" is now shown as the difference, instead of NaN (not a number).
• Fixed issue where ADX List view did not showed squares or random characters in the real-time value column.

Some of what TunerPro has to offer in basic form...

• Full bin editing capability raw or via definition referencing
• Full bin definition editing capability including reordering and item comments
• Import definitions from various formats
• 2D Graphing with multi-point dragging
• 3D Graphing with multi-point dragging, surface plot, colored height map, rotation, translation, and zoom
• Full-featured math engine with support for dozens of common functions (e.g. sin, cos, min, max, etc) and referential calculation (output from one calculation can be used as input for another)
• Table manipulation functions for scaling rows, columns, and entire tables
• 3D table smoothing functionality with user-defined alpha
• Compare the current bin to up to 4 other bins at once
• Includes a bin stacking tool for compiling multiple bins into one image
• Bin Change Logging - changes can be auto-saved to a log file for easy tracking
• Search for items by title keyword, address, or size
• Rapidly list the differences between two bin files
• View bins graphically for finding patterns and tables
• Export bin data/contents to a plain text file for easy viewing and/or printing
• Table range selection and editing ability - pull fuel/spark out of regions with minimal effort
• Ability to Copy/Paste tables to/from Excel for extensive editing
• Full-featured raw hex/octal/binary/dec editor
• Easily check for and download the latest available version directly from the menus
• Plug-in architecture for end-user extensibility
• Much more!

Additional TunerPro RT Features

TunerPro RT includes all of the features of the free version of TunerPro, plus:

• Emulation functionality - Fully supports nearly all of Craig Moates's hardware as well as XTronics Romulator, and Bob Bailey's MAF Translator Pro, with plug-ins available for other hardware
• In-editor support for burning and reading PROMs with Craig Moates's Flash & Burn and AutoProm.
• Simultaneously emulate and data log using AutoProm or serial->USB converter
• Multiple emulator support for 16-bit applications
• Real-time data monitoring and logging - record to file for later playback
• Fully customizable dashboard and data graphing for easy viewing of real-time data in-car
• View/Log 3 additional channels of A/D (WBO2, etc) using the AutoProm
• Easily view engine parameters and state information via dockable tab windows
• View real-time data history in multi-series side scrolling charts
• Plot real-time data trends using histograms

TunerPro RT natively supports the following hardware

• Moates AutoProm (APU1)
• Moates Flash & Burn (BURN1)
• Moates Flash & Burn 2 (BURN2)
• Moates Quarterhorse
• Moates Roadrunner
• Moates Ostrich
• Moates Ostrich 2.0
• Moates Demon
• Moates Jaybird J3
• Moates OBDI USB ALDL Interface (ALDU1)
• Moates F3 Ford Memory Adapter / FA Ford Module Programming Adapter
• F8 Destiny Programmer / F8 Multi-Position Chip
• Xtronics Romulator I
• Xtronics Romulator II
• Bailey Engineering / Full Throttle Technologies MAF Translator Pro