Build a Custom or Revised Ford Tune File

Build a Custom or Revised Ford Tune File - 1988 to 2024

Custom or Revised Tune File for current or new customers.

Store Code - Part Number : BUIA23VU51

In stock

Enter the Year and Model of Vehicle Needing a Tune (Required)

ECU/PCM Calibration ID or Strategy (Required)

Is this a SCT Flash Device Tune? (Required)

Are you sending us a device to tune? (Required)

Use Key, Device Serial or Order Number (Required)

Build A Tune (File Type Needed) (Required)

Build A Tune (Intercooler Upgrade) (Required)

Build A Tune (CAI Calibration) (Required)

Build A Tune (Octane) (Required)

Build A Tune (CID) (Required)

Build A Tune (Power Adder) (Required)

Build A Tune (Auto Trans) (Required)

Build A Tune (Torque Converter) (Required)

Build A Tune (Cams) (Required)

Build A Tune (Heads) (Required)

Build A Tune (Intake Manifold) (Required)

Build A Tune (Exhaust) (Required)

Build A Tune (Gear Ratio) (Required)

Build A Tune (MAF) (Required)

Build A Tune (Injectors) (Required)

Custom Tune Mod List (Required)

$0.00

Qty

Product Information

To purchase a Flash Device, go here.

CHIP TUNING ONLY: If this is a SAME COMBO CATEGORY revision and you are a ***CURRENT CUSTOMER that owns a software/hardware setup; and have the ability to READ the chip devices tune*** ---- please send the current tune file to us as well. You can do that by going here and uploading it/them to our server --- If we do not receive the file, we will not revise until we do. Flash Device customers can ignore that.
NOTE: If this is a SCT download, you MUST have the Device Updater installed on your computer to load the tune to a supported flash device.
ANOTHER NOTE FOR CHIP TUNING DEVICES: You MUST have our tuning hardware, a compatible J3 chip device and chip burner; or a Quarterhorse to be able to use this file. If you are sending it in to us for loading of the file(s), contact us to set that up. You can use the TwEECer Base and R/T in CalEdit software for the OBD-I and CONVERTED OBD-II files as well, but once the file is saved, the standard 56k or 216k binary format is altered; and can only be used in CalEdit from then on out. You must also understand that we ONLY program the Moates F3V2 Chip, the SCT Eliminator Chip, TwEECer and TI-Performance Chip.
WE DO HAVE OPTIONS TO SET YOU UP USING OUR XDF's TO TUNE CALEDIT / TWEECER / STKR .CCF FILES BUT THEY MUST BE CONVERTED IF 2 OR 4 BANK TUNES.

If you want to tune yourself with our chip tuning setup, go here.

Custom tune files

Select from the options above to build a file that can get you started in the right direction.

If this is a revision, add your use key, SCT Device Serial Number or previous order number above. (We will verify) -- These MUST match customer info in our database.

Dial-in/adjustments are included until we get you set up.

The file will not be immediately available for downloading but an email will be sent when it is. This will be within 24 hours of purchase, and will be available for download in your account portal or email address used at checkout.

* Free Lifetime Re-Tunes include dial in's and adjustments in the same combo category.

Specification

Store Code - Part Number	BUIA23VU51
Manufacturer	MK8S
Condition	New

Customer Reviews

This product hasn't been reviewed yet.

Write a review