• Click to enlarge
  • Click to enlarge

TI Performance J3 Chip

Store Code - Part Number : TI 3FCUD56
In stock
$299.00 $200.00
Qty



enlightenedTo custom tailor your tune, see the  Build A Tune option, and add to your purchase.

REMEMBER --- Once shipped, you cannot load files to it unless you have the proper burner and software to do so, or send it back to us to do it for you.

This is the chip device we use in our Ford Custom Tuning Hardware/Software Package. It is made by TI Performance out of Australia and works with their burner.

This chip can be used in Ford Vehicles from 1988 to 2004 with the EEC-IV or EEC-V PCM.

We load the custom tune files to your chip before it gets sent out, so all you have to do is plug in and go.

Select from the options above to get going.


Basic Tune Features:

  • Fan Speed Changes (High and Low Temps)
  • 4R70W/AODE Transmission Upshift Speed Changes (in MPH)
  • TC Lockup Adjusted in the 4R70W (in MPH)
  • Injector Slopes Dialed-In
  • Rev/Speed Limiter Adjusted
  • Adaptives
  • Fuel Delivery Adjustments
  • Timing and Spark Changes
  • Line Pressure in the 4R70W
  • Knock Sensor Calibration (If Equipped)
  • Get access to your personal tune database and files
  • Many, Many more changes
  • Must be programed by the TI Performance Burner, or our Ford EEC-IV or EEC-V Tuning Package setup. 

Optional Tuning which some below will be an additional cost to the chip itself:

  • Ring/Pinion Gear Changes - HIGHER THAN 4.10 GEARS IS AN EXTRA CHARGE
  • IMRC Control (If Equipped)
  • MAF Calibration - IF SCALING IS REQUIRED WE WILL NOTIFY YOU (OVER 64 LBS/MIN EEC-V OR 86 LBS/MIN EEC-IV) - EXTRA COST
  • Fuel Injector Size Changes - PN AND SIZE REQUIRED. 42# MAX, SCALING REQUIRED AFTER, EXTRA COST FOR THIS.
  • Adaptive Learning
  • CAI Calibration
  • N/A, Turbo, Blower or N2O - EXTRA COST FOR THIS

* Free Lifetime Re-Tunes include dial in's and adjustments in the same combo category.

Store Code - Part NumberTI 3FCUD56
ManufacturerMK8S
ConditionNew
Weight2lb
Width2″
Height1″
Depth2″

Customer Reviews


This product hasn't been reviewed yet.

Write a review



Please enter a valid email address.

This field is required.